1. Before use, check whether the canned liquefied petroleum gas pipeline is connected and whether it is connected firmly before use.
2. Pour appropriate amount of water into the residual oil basin to keep a certain amount of water to prevent drying. If the water dries up, pull out the stove chassis and add water.
3. Open the main gas valve, press and turn the electronic ignition switch to the left, let go after igniting the burner (combustion plate), and adjust the firepower.
5. After use, the main switch of the air source and each ignition switch should be turned off.
Smokeless Grill Precautions
1. Handle with care during transportation, do not put it upside down, sideways, heavy pressure, or violent vibration to avoid damage. If the infrared burning plate (burner head) of the barbecue stove falls off due to violent vibration and bumps, please don`t panic, just restore the plate directly (slightly pull down the round hole iron plate used to clamp the plate, and put the hollow head of the plate Just put it in, or remove the screw in the middle of the board, put the hollow head of the board into the iron sheet with a round hole, and then fix the screw).
2. The gas grill series all use low-pressure valves (such as the valves used in household gas tanks), and it is forbidden to use medium-pressure valves or high-pressure valves.
3. When a gas leak is found, the gas valve should be closed immediately, and the maintenance department should be repaired before use (if it is a small problem, it can usually be solved by repairing the gas stove).
4. When grilling, avoid throwing water and oil at random, and avoid dripping oil on the burning plate, otherwise certain oily smoke will be generated.
5. The grill grid on the top of the grill is made of wire. During long-term high-temperature grilling, physical reactions of thermal expansion and contraction will occur, and it will become slightly soft, or slightly distorted and deformed. This is a normal phenomenon. Due to the limitation of the high temperature of the barbecue oven, the grill grill will never be melted and broken. When the grill grill is deformed, it is only necessary to use a tool to straighten it slightly, and when the grill is over, the deformed grill The grid frame will also automatically cool down and recover. Of course, if you need a stronger barbecue grid, it is recommended that you can order a pure steel structure grid at the street hardware store, which is not easy to deform.
Jiangmen Merit Metal Electirc Appliance Co.,Ltd, Professional Gas grills.Outdoor kitchen.Built-in grills.Built-in Drawer And Door.GAS GRILL.Barbeque Grill.Gas Bbq Grill.Kitchenaid Grill and Built-in Grill industry Manufacturer in Jiangmen, Guangdong, China. For more information, please contact us:
Tel:+86-0750-3722081
Mobile Phone:+8613750366555
Email:ming@meritbbq.com